I MAKE DOODADS, DINGBATS AND RINKYDINKS FOR MINI TRUCKS. EVERYTHING BOLTS INTO EXISTING HOLES IN THE TRUCK SO THERE’S NO DRILLING & MORE CHILLING. INFO
ODD.DEVICES
BROOKLYN, NEW YORK 

 

BREAKING NEWS:

ORDERS WILL LIKELY BE SLOW TO GO OUT FOR THE NEXT COUPLE WEEKS BECAUSE WE’VE ADDED A NEW MEMBER TO THE FAMILY.



TAILGATE CHAINS KIT v2

 WHAT YOU GET:
  • 1 PAIR OF TAILGATE CHAINS
  • 2 PAIRS OF BRACKETS
  • 4 PAIRS OF HARDWARE
  • 3MM ALLEN KEY
  • LEAVE A NOTE AT CHECKOUT WITH WHAT COLOR HARDWARE YOU WOULD LIKE. OPTIONS AT THE BOTTOM OF THE PAGE. M6 CONE WASHERS FOR ACTY M8 CONES FOR OTHER MODELS.

The color on the shackle (shown in red may be an option in the future but did a test and it chipped almost emmidiately. so...) 
If you need a custom length let me know and I’m sure I can accomodate. 
For installation and adjustment the BrACTY holes are off center so you can swap sides and they will be more towards the front or rear of the truck. 

Powder coating the brackets is an extra $40.

THE PEACE PIPE 


WHAT YOU GET:
  • ACTY TRUCK ONLY
  • 304 STAINLESS PIPE 
  • GLASS PACKED
  • COPPER GASKET

The Queef  has a 1.75” inlet and outlet allowing for more packing inside. The BUBBLER has a 1.75” inlet and a 2.5” outlet. You’re probably wondering if one is louder than the other? I have no idea. My ear can’t really tell the difference. Bolts up to the stock studs. And in order to do that, the flange has to be thin. If you’d like a thicker flange I can do it but you’ll have to knock out the stock studs and replace them with longer bolts. One thing I’ve noticed is that the existing flange with the studs is corroded  and pitted. Those pits can allow exhaust to leak. Not a huge deal but if you have the means it’s worth attempting to get that surface flat. It wont be easy. And don’t go making it worse.


Driving a mini truck gets you a lot of attention. People get curious and ask all kinds of questions. The most common question I get is, “Hey! What is the smallest part in your mini truck?” “That’s easy.” I say, “It’s my brain.”


BrACTY 1.o

WHAT YOU GET:
  • 1 PAIR OF BRACKETS
  • 304 STAINLESS STEEL
  • .125 INCHES THICK
  • HOLDS M6 OR M8 BOLT
  • HARDWARE SOLD SEPERATE

THE ORIGINAL TIEDOWN BRACKET. 
The BrACTY 1.o v2 is an updated design that is slimmer trimmer and surely a winner. The diameter of the hole is down from 1” to 3/4”. Plenty big for a ratchet strap hook or carabiner, sadly, too small for a weiner.

Powder coating the brackets is an extra $40.

BrACTY 2.oo

WHAT YOU GET:
  • 1 PAIR OF BRACKETS
  • 304 STAINLESS STEEL
  • .125 INCHES THICK
  • HOLDS M6 OR M8 BOLT
  • HARDWARE SOLD SEPERATE

These tiedowns mount to all the double hole spacing areas on an Acty like the latches and the base of the rack on the cab. Iuse them to tiedown my motorcycles and bikes and random things. Super handy to have and don’t bend like the stock hooks on the sidegates. 


Powder coating the brackets is an extra $40.



BRoVAL

WHAT YOU GET:
  • 1 PAIR OF BRACKETS
  • 304 STAINLESS STEEL
  • .125 INCHES THICK
  • HOLDS M6 OR M8 BOLT
  • HARDWARE SOLD SEPERATE

One mounting slot for more adjustability. Slide it this way or that way to fit here or there to adjust the chain length if you need it. 
Fits everywhere on an Acty and most places on a Carry and Sambar but not all. So if you’d like to check your bolt spacing - the widest spacing for M6 bolts is approx. 41.86mm (1.65in.) on center. So check your truck. Widest with M8 bolts is 40mm OC (1.55in).


Powder coating the brackets is an extra $40.

UNIBRACKET

WHAT YOU GET:
  • 1 PAIR OF BRACKETS
  • 304 STAINLESS STEEL
  • .125 INCHES THICK
  • HOLDS M6 OR M8 BOLT
  • HARDWARE SOLD SEPERATE

These were made to fit the oddball bolt spacing of a Carry and a Sambar. The spacing is a bit wider than an Acty, but it’s pretty much only on the tailgate. They will work fine on an Acty too, and I think a Daihatsubishi or whatever it’s called but I’m not sure. 
The slots, at the widest points, measure 56.5mm (2.225in). So with M6 bolts it will span 50mm OC (1.97in). M8 spans 49mm (1.93in) OC.


Powder coating the brackets is an extra $40.




A/CUP

WHAT IT IS:
  • FOR TRUCKS WITH A/C BUT WORKS WITH NON A/C TOO
  • POWDER COATED  STEEL 
  • INSERT HAS A 3.25” INCH OPENING - YOU CAN USE WITHOUT THE INSERT AT WELL. WHY? MY YOU NEED THE EXTRA BIT FOR YOUR BIG JUGS. 

A long time coming but here it is. Install is a little more involved. You need to remove the plastic around the seatbelts. You need to remove the seatbelts. Take the bolts with all the metal washers and put them through the cup holder holes then thread those plastic washers back onto the bolts under the cupholder. Then put it on through the seatbelts and that black tray that holds the seatbelts in line. Then just tighten the bolts back down.
Yes. All the cup holders work with the stock plastics in place. 

B CUPS

WHAT IT IS:
  • LEAVE A NOTE  AT CHECKOUT WITH THE COLOR OF HARDWARE YOU WANT
  • THIS DOESN’T WORK ON ACTY’S WITH AC
  • THE DESIGN OF THE MOUNT, WHERE IT BOLTS IN IS SLIGHTLY DIFFERENT THAN WHAT IS PICTURED. 

You can see M6 HARDWARE options at the bottom of the page. 

This thing comes with powder coat or no powder coat. The diameter of the openings is 2.95 inches so check and see if that works for your beverage of choice. Those smaller holes hold the lighter thingy and a lighter USB thingy. It bolts to existing holes in the body, so no drilling.
Yes. All the cup holders work with the stock plastics in place. 



D CUP


WHAT YOU GET:
  • POWDER COATED CUPHOLDER
  • STAINLESS CUP INSERT
  • 1 PAIR OF M6 HARDWARE (leave a note at checkout what color washers you want.)
  • DOES NOT WORK IF YOU HAVE AIR CONDITIONING  (You’re already too cool.)

Drop your jug into the D CUP. This one holds a big one. Tell me what color hardware you would like in the notes at checkout. Bolts into existing holes so no need to drill anything. Only works with NON AC Actys. 
The stainless cup insert has an adhesive strip under the lip so you can stick it to the holder. 
Yes. All the cup holders work with the stock plastics in place. 

DOUBLE D CUP


WHAT YOU GET:
  • POWDER COATED CUPHOLDER
  • STAINLESS CUP INSERT
  • 1 PAIR OF M6 HARDWARE (leave a note at checkout what color washers you want. M6 countersuck are the way to go.)
  • DOES NOT WORK IF YOU HAVE AIR CONDITIONING  (You are already too cool.)

This thing holds a pair of proper jugs. Tell me what color hardware you would like in the notes at checkout. Bolts into existing holes so no need to drill anything. Only works with NON AC Actys. Inner diamerter of cupholder is 3.54 inches.
The stainless cup insert has an adhesive strip under the lip so you can stick it to the holder. 
Yes. All the cup holders work with the stock plastics in place. 



I just read in the Journal of Automotive Science that sidewalks were created to give Ford F-150 drivers a way to walk home after their pile of bolts breaks down. I find that hard to believe but you can’t argue with science. 


BASKET CASE

WHAT YOU GET :
  • 16GA STEEL BASKET
  • CLEAR COATED OR BLACK POWDER COAT
  • RUBBER FEET

The BasketCase... in case you need a basket. Made to fit perfect under the passenger seat. Holds your straps... heck even holds your hand or at least my hand. Maybe a tool rool, maybe some cleaner and rags, maybe your baby. I don’t know but it sure is ... handy. 

BATTERY COVERS

WHAT YOU GET:
  • BATTERY COVER
  • A PAIR OF M6 WASHERS AND BOLTS. (LET ME KNOW WHAT COLOR WASHERS YOU WOULD LIKE IN THE NOTES AT CHECKOUT.)
  • A PAIR OF RUBBER WASHERS THAT GO ON THE BOLTS BEHIND THE BATTERY COVER.

Honda ACTY ONLY. This is a steel battery cover and you’re gonna need to paint it unless you like rust. I’ll paint it for you but it’s gonna cost ya. There’s 3 designs I have  but I only have pics of 2. I can do a design of your choice as well... if it’s cool. 


ROOF rACTY

THIS ROOF RACK BOLTS INTO EXISTING HOLES IN THE TRUCK. YOU’LL NEED TO REMOVE THE STOCK RACK. IT COMES IN PARTS THAT ALL BOLT TOGETHER. THERE’S 4 LEGS, 4 ARMS, 3 RIBS THAT ARE ALSO REMOVABLE AND ONE OF WHICH HAS A MOUNT FOR THE TRUCK BED LIGHT. IT COMES WITH 2 BrACTYS THAT HAVE TIEDOWN HOLES IN THEM TOO. 
CAPACITY: UNKNOWN
I’ve had 6 pieces of 3/4 MDF on top which is around 600 pounds. Use your better judgment. If your brain is making you question what you’re doing IT’S A BAD IDEA. 

BIKE rACTY


THESE PICS SHOW THE FIRST PROTOTYPE, A STRAIGHT BAR. THE CURRENT VERSION HAS BENDS ON THE ENDS THAT PLACE THE BAR FURTHER AWAY FROM THE CAB. I’LL UPDATE PICS ASAP. THE MOUNT CAN ACCOMODATE ALL AXELS EXCEPT A LEFTY.   

KARI HAT

The Kari Hat is based on the Japanese Kari license plate issued to illegal or unregistered cars.

It’s the white plate, black lettering with a red slash / cutting through the middle. It gives you the ability to drive on public roads without a valid permit.

Embroidered logo with adjustable clasp on the back. 


HARDWARE
YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS

M6 COUNTERSUNK WASHER

YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS

M6 CONE WASHER

YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS. THESE ARE PERFECT FOR THE SIDEGATE STOPPER BOLTS. 

M6 FLUSH WASHER

YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS. THESE ARE PERFECT REPLACEMENTS FOR THE HEADREST BOLTS. 

M6 RAISED FLAT WASHER
YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS




M8 COUNTERSUNK

YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS

M8 FLUSH

YOU GET A PAIR OF WASHERS + STAINLESS BOLTS + SS NUTS + SS FLAT WASHERS

BAR TENDERS

2 BARS FOR OVER THE REAR WINDOW. RAW STEEL WITH 4 M6 STAINLESS BOLTS

POWDER COATING


You asked for it and it turns out I already had it, just forgot about it. It’s $40 for up to 4 pairs because it’s about the same amount of work as 1 pair. If you want more, we’ll talk. So you gotta buy the BrACTY and then buy the powder coating.
POWDER can add a week to the ship date. It’s a pain and takes some time from time to time. 



HARDWARE KITS

Here’s a few kits to replace all the existing hardware on your ACTY truck. You’ll get the countersunk washers, bolts and nuts where needed. 


TRUCK BED KIT

WHAT YOU GET:
  • FOR ACTY
  • 16 M6 COUNTERSUNK WASHERS + STAINLESS BOLTS + NUTS
  • 8 M8 COUNTERSUNK WASHERS + STAINLESS BOLTS
  • THIS COVERS THE WINDOW, RACK, ENGINE COVER,  SIDE GATES & TAILGATE



HEADREST KIT

WHAT YOU GET:
  • FOR ACTY
  • 8 M6 FLUSH WASHERS + STAINLESS BOLTS

TRUCK BED + HEADREST

WHAT YOU GET:
  • FOR ACTY
  • 16 M6 COUNTERSUNK WASHERS + STAINLESS BOLTS + NUTS
  • 8 M8 COUNTERSUNK WASHERS + STAINLESS BOLTS
  • 8 M6 FLUSH WASHERS + STAINLESS BOLTS
  • THIS COVERS THE WINDOW, RACK, ENGINE COVER,  SIDE GATES, TAILGATE & HEADRESTS


YOU’VE HIT THE END OF THE ROAD. FILL ‘ER UP WITH PREMIUM AND KEEP THOSE THREADS LUBED.