︎ODD.DEVICES

HARDWARE

︎

THE PEACE PIPE

$420 ︎ ON SALE

WHAT YOU GET:

304 STAINLESS PIPE & MUFFLER - GLASS PACKED
COPPER GASKET
HARDWARE

THE QUEEF has a 1.5” inlet and outlet allowing for more packing inside. The BUBBLER has a 1.5” inlet and a 2.5” outlet. You’re probably wondering if one is louder than the other? My ear can’t tell the difference. Bolts up to the stock studs.

CHAIN & BRACKET & HARDWARE PACKAGE

WHAT YOU GET:

1 PAIR OF TAILGATE CHAINS
2 PAIRS OF BRACKETS
4 PAIRS OF HARDWARE
LEAVE A NOTE AT CHECKOUT WHAT COLOR HARDWARE YOU WOULD LIKE. OPTIONS HERE

The length is good on an HA4 Acty and Carry and Sambar but don’t hesitate to confirm lengths. I only have a 1993 SDX Acty so I’m uncertain what years are good for Carry and Sambar, maybe all years. If you need a custom length I can accomodate.

D CUP

WHAT YOU GET:

POWDER COATED CUPHOLDER
STAINLESS CUP INSERT
1 PAIR OF M6 HARDWARE (leave a note at checkout what color washers you want.)
DOES NOT WORK IF YOU HAVE AIR CONDITIONING (You are already too cool.)

Drop your jugs in the D CUP. This one holds some big ones. Limited supply, just 2 in each color - black and orange. Tell me what color hardware you would like in the notes at checkout. Bolts into existing holes so no need to drill anything. Only works with NON AC Actys.

BASKET CASE

WHAT YOU GET :

16GA STEEL BASKET
CLEAR COATED
RUBBER FEET

The BasketCase... in case you need a basket. Made to fit perfect under the passenger seat. Holds your straps... heck even holds your... hand or at least my hand. Maybe a tool rool, maybe some cleaner, maybe your baby. I don’t
know but it sure is ... handy.

A/CUP

WHAT YOU GET:

FOR TRUCKS WITH AC
11GA STEEL
TRIPLE CLEAR COATED
HOLE IS 2.94” IN DIAMETER SO MEASURE YOUR CUP
LITTLE HOLE IS FOR THE LIGHTER
WORKS WITH NON AC TRUCKS TOO

A long time coming but here it is. Install is more involved. You need to remove the plastic around the seatbelts. You need to remove the seatbelts. Take the bolts with all the metal washers and put them through the cup holder holes then thread those plastic washers back onto the bolts under the cupholder. Then put it on through the seatbelts and that black tray that holds the seatbelts in line. Then just tighten the bolts back down. This will be easier if you remove the drivers seat. There’s pics in the slideshow.

BrACTY 2.oo

These tiedowns mount to all the double hole spacing areas on an acty like the latches and the base of the rack on the cab. The 2 holes are .75” in diameter. Widest bolt spacing is 40mm (1.58in). Fits everywhere on an HA4 Acty.

304 Stainless
You get a pair
.125” in thick
Holds M6 or M8 bolt
Hardware sold separately

uniBracket

(Sambar / Carry / Daihatsubishi? / Acty)

I haven’t tested it but this guy should fit a Carry, Sambar, Acty, and I think a Daihatsubishi or whatever it’s called.
The slots, at the widest points, measure 56.5mm (2.225in). So with M6 bolts it will span 50mm OC (1.97in). M8 spans 49mm (1.93in) OC.

304 Stainless steel
.125” thick
You get a pair
Holds M6 or M8 bolt
Hardware sold separately

BrOval v2

One mounting slot for more adjustability. Slide it this way or that way to fit here or there and adjust chain length if you need it.
Widest spacing for M6 bolts is approx. 41.86mm (1.65in.) OC. So check your truck. Widest with M8 bolts is 40mm OC (1.55in).

304 Stainless steel
.125” thick
You get a pair
Holds M6 or M8 bolt
Hardware sold separately

BrACTY 1.o v2

The BrACTY 1.o v2 is an updated design that is slimmer trimmer and surely a winner. The diameter of the hole is down from 1” to 3/4”. Plenty big for a ratchet strap hook or carabiner, sadly, too small for a weiner. :(

WHAT YOU GET

1 pair
316 Stainless steel
.125 inches thick
Hardware sold separately

C CUPS

HARDWARE IS SOLD SEPERATE
THIS DOESN’T WORK ON ACTY’S WITH AC

If you need HARDWARE go get a pair of M6 hardware here ︎.

This thing comes with powder coat or no powder coat. The diameter of the openings is 2.95 inches so check and see if that works for your beverage of choice. Those smaller holes hold the lighter thingy and a lighter USB thingy. It bolts to existing holes in the body, so no drilling.

HEADREST HARDWARE

This is a set of 8 bolts and 8 washers for the headrests inside the cab.

WHAT YOU GET:

4 PAIRS OF WASHERS
4 PAIRS OF BOLTS

BATTERY COVER

Honda ACTY ONLY. This is a steel battery cover and you’re gonna need to paint it unless you like rust. I’ll paint it for you but it’s gonna cost ya. There’s 3 designs I have but I only have pics of 2. I can do a design of your choice too... if it’s cool.

WHAT YOU GET

Battery cover
A pair of M6 bolts and washers. Let me know what color washers in the notes at checkout.
A pair of rubber washers that go on the bolts behind the cover. It’ll make sense later.

FRONT LIFT KIT

If you have GAZ coilovers on the front of your HA4 Acty it probably lowered the front end. These will get you back to level by raising the front end around 1.5 inches.

POWDER COATING

You asked for it and it turns out I already had it, just forgot about it. It’s $40 for up to 4 pairs because it’s about the same amount of work as 1 pair. If you want more, we’ll talk. So you gotta buy the BrACTY and then buy the powder coating.

POWDER can add a week to the ship date. It’s a pain and takes some time from time to time.

HARDWARE

I am trying to simplify the hardware options but it hasn’t been easy. One of the advantages of doing small runs of things is that I can always be trying out new things. One of the disadvantages is that it’s really hard to keep things in stock and clearly communicate what is in stock if anything. So I’m working on it, it’s time consuming, but go to the link below to see what’s up with hardware.

Read MORE ︎

SUPER LUBE

1cc super lube tube. It’s not a lot but it’s enough.

All stainless steel threads should be lubricated .

You need to prevent galling and corrosion – ideally with a Nickel based lubricant such as Loctite 771 or a PTFE based lubricant such as SUPER LUBE. PTFE stands for polytetrafluoroethylene.

Read MORE ︎

ROOF RACTY

(COMING SOON)
︎

INDEX OF DEVICES ︎

CUP HOLDER

This is for all those that like to drink and drive... Holds 2 cups and the cigarette lighter thingy.

COMPATIBILITY