CHAINS

︎ 316 Stainless steel
︎ Abrasion resistant heat shrink
︎ Galvanized carabiners
︎ Made in USA
︎ Penny approved. 

SAMBAR & CARRY DRIVERS:

Get the UniBracket & hardware on the home page. 2 pairs. Check the size of your bolts. You probably need some M8, which is around .31” in diameter. M6 is around .24”. 

SUPER LUBE 1cc

All stainless steel threads should be lubricated ...

to prevent galling and corrosion – ideally with a Nickel based lubricant such as Loctite 771 or a PTFE based lubricant such as SUPER LUBE. PTFE stands for polytetrafluoroethylene.

This is a pair of tailgate chains with locking quick-ish release carabiners. 

WHAT YOU GET:

• 2 Chains
  
• 4 Carabiners
• Brackets and hardware sold separately.
  

WHAT YOU NEED:

• ACTY drivers I  suggest the BrACTY 2.oO v4 just below - 2 pairs and 4 pairs of hardware. All M6 hardware. 
  
  
• Sambar and Carry drivers scroll down for the UniBracket - 2 pairs. You probably need some M8 bolts so check your situtation.

HARDWARE

Go here to see what’s available ︎
Sambar and Carry drivers use M8 in places so double check your bolts. 

CHAIN

The chain is 316 stainless, which is marine grade, resists corrosion from salt. 

CARABINERS

The caribiners are galvanized steel. Pretty easy on and off. Press the orange button down while you press the biner open. 

DRESSING

The chains are dressed in 2 layers of an abrassion resistant heat shrink sleave and capped with a marine grade hear shrink on both ends. Tightens the look, keeps the rattling to a minimum and protects the paint.