BrACTY 1.o v2

︎ Material: 316 SS or Mild Steel
︎ Thickness: 0.125”
︎ Finish: Brushed
︎ Made in USA


All stainless steel threads should be lubricated ...

to prevent galling and corrosion – ideally with a Nickel based lubricant such as Loctite 771 or a PTFE based lubricant such as SUPER LUBE. PTFE stands for polytetrafluoroethylene.

The BrACTY 1.o v2 is an updated design that is slimmed down with a smaller hole diameter down from 1” to 3/4”. Plenty big for a ratchet hook or carabiner. 


If you select the hardware I will send you 4 bolts and 4 washers. The bolts are sized M6. M6 is the size of bolt on all of the tailgates. The bolts behind the cab are M8. I’ll be offering that soon but I just don’t have them yet. 


Right now I only have Black, Grey and Yellow, Purple, Pink and Raw silver. Mix and match if you want. Just let me know in the notes. 


As I’ve said before, I recommend painting the mild steel versions. Primer is everything as you know, please let it dry, completely. If you don’t want to paint them at least wax them... with a crayon or spray with some Permalac. Grease works too. Or you can always raw dog it. It’s risky but it’s your life. They’ll last either way but you’ll be able to watch them age.